Levelstate Systems Drum Level Indication  
TRANSLATE PAGE
Levelstate Low Pressure Water Column

 

LEVEL INDICTAORS
LEVEL SWITCHES
PROBES
WATER COLUMNS

 

 

 

TYPE 501 LOW PRESSURE WATER COLUMN

The 501 is a low pressure water column manufactured from ASTM A105 carbon steel extrusion The section was designed by Levelstate specifically for the application. The rating is 150 bar @ 341 degrees C and pressure tested to 225 bar @ ambient temperature. The probe seats are machined into the thick wall of the extrusion at custom spacing as determined by the customer. Probes are staggered odds on one side and evens on the other, this gives the greatest resolutions over smaller distances. Probes are secured by means of a screw thread and are sealed by way of a Metaflex gasket. The minimum probe spacing is 25mm. Steam and water connection stubs are provided with either socket or butt weld finishes. The connections are sch 160 material and 1 inch standard O/D. The drain connection provided is 1/2 inch O/D standard with either socket or butt weld finish. We can provide alternative sizes as requested. The top of the column incorporates an eye bolt for hanging purposes, but this can be substituted for a vent connection.

Type 501 Water Column

 

CONDITIONS OF USE- PRIVACY POLICY - DISCLAIMER